سارونةمحمد
المساهمات : 1
تاريخ التسجيل : 29/08/2011
 |  موضوع: زيني أو أضيفي لمسة على بيتك أو حفلك .. برتبلات مظلات خيام كماليات.. الإثنين أغسطس 29, 2011 2:19 am | |
| برتبلات - مظلات - خيام - كماليات .. مركز شوقي للتجارة - الدمام
يسرنا نحن مركز خيام شوقي أن نعرض عليكم خدماتنا في
( البرتبلات - المظلات - الخيام - الكماليات .. )
بيع المظلات
ويتوافر لدينا منها 3 أنواع
1- مظلات PVC ألألماني
Fabric: PVDF coated PVC Fabric
Technical Specification of PVC/PVDF Fabric
Manufactured by: Verseidag Indutex GmbH, Germany
Yarn count 8/8 yarn/cm
Total mass 750 g/m2
22 oz/Yard
Width 250 cm
Tensile strength 2800/2500 N/5 cm
(warp/weft) 2600.8/2322.1 lbs.
Tear strength 300/200 N
(warp/weft) 322.98/218.32 lbs.
Adhesion 100 N/5 cm
Flame redundancy DIN 4102 B1,Bs 5438, NFPA-701
Surface Tretment Weldable PVDF flour lacquer
Product destination Tent and car park
warranty 10 years
Material Specifications:
1. Steel Tube 150mm x 150mm x4mm x 6m for columns
2. Steel Tube 70mm x 70mm x 3mm x 6m for beams
3. Steel Tube 30mm x 60mm x 2mm x 6m for web members
4. Poly Vynil Chloride (pvc germany) as covering membrane.
2-pvc الكوري
Product:- PVC KOREA - 1100gsm
Colours: WHITE, BEIGE, KHAKI,
DIN 53352 FINISHED WEIGHT GR/M2, 1100
DIN 53353 FINISHED THICNESS M/M 0.9
DIN 53354 STRIP TENSILE Kgf/ 2 inch 340 / 300
DIN 53354 ELONGATION % 22 / 35
DIN 53363 TRAPIZOID TEAR Kgf 45 / 40
DIN 53357 ADHESION Kgf / 2 INCH 14.0 / 14.0
DIN 53886 HYDROSTATIC RESISTANCE Kgf /CM2 45
DIN 53361 LOW TEMP. RESISTANCE C (- 25)( REQUIRE OPTON )
DIMENSIONAL STABILITY % < 0.5%(at 70'c 24 Hour)
DIN. NFPA701.M2.CL2,LSG FLAME RETARDANT WE MEET ALL REQUIRE FLAME RETARDANCE
DIN 54004( XENON- ARC LAMP LIGHT FASTNESS GRADE 6 <
FS191 - 5306 ABRASION (H18, 1000GR ) CYCLE 350 <
AATCC 100 REYERS ANTI - MILDEW ZONE OF NO GROWTH REQUIRE OPTION
SURFACE LACQUER TREATMENT TOP or BOTH SIDE REQUIRE OPTION
WIDTH CM 155, 310
ROLL LENGTH M 50 ( STANDARD )
WARRANTY YEAR 5
REMARK RESULT DESCRIBE WARP/WEFT.
(THE TECHNICAL DATA OF THIS PAGE IS ALL ARITHMETICAL AVERAGE AND THE ERROR PERMITTED IS 5% ABOVE OR BELOW )
3-الشدنت
Technical Specifications
Base Material: UV Stabilized High Density Polyethylene (HDPE)
Manufacturing: Monofilament yarn and tape utilizing the knitted lock stitch pattern and stentoring heat process produces a fabric that will not tear or fray if cut.
Features: Provides UVR protection in the range of 91% to 96%. HDPE fabric will not mold, mildew, rot or absorb moisture, no natural fibers therefore fabric is non-biodegradable. High strength, excellent resiliency and elastic properties to meet harsh weather conditions including protection from hail.
Recommended Usage: Utilized in accordance with shade cloth manufacture's specifications, product data, installation instructions, use limitations and recommendations based on the entire structure. Do not use near open flames or Bar-B-Que grills. Avoid direct contact with chemicals such as chlorine, muriatic acid, or other acidic chemicals and halogens. Clean with mild soap and water pressure.
Polytex 230
Shade Cloth Colors Shade Factor UVR Block
Aquatic Blue 88.2 94.2 %
Black 94.9 95.1 %
Brunswick Green 95.6 96.9 %
Cherry Red 81.0 91.0 %
Desert Sand 84.2 94.8 %
Natural 78.9 95.1 %
Navy Blue 95.7 98.8 %
Ochre Red 94.4 96.7 %
Rivergum Green 85.8 93.0 %
Sky Blue 94.7 96.8 %
Steel Grey 91.9 96.7 %
Turquoise 89.6 95.4 %
Yellow 77.0 93.2 %
Performance:
Tensile Strength - Warp 737 N
Tensile Strength - Weft 1592 N
Wing Tear - Warp 143 N
Wing Tear - Weft 203 N
Bursting Pressure 3200 kPa
Bursting Force 1578 N
Flammability:
Flammability Index: Range: 0-100 17
Ignitability Index: Range: 0-20 13
Spread of Flame Index: Range: 0-10 8
Heat Evolved Index: Range: 0-10 7
Smoke developed Index: Range: 0-10 6
Spread Factor: Warp Weft
Range: 0-40 5
3
Heat Factor: Range: 0-upward 2
4
Maximum Height: 5.3 8.7
Heat: 8 Degrees Celsius Minimum 6.5 Degrees Celsius Minimum
________________
بيع وتأجير البرتبلات - البيوت الجاهزة
MATERIAL SPECIFICATIONS:
General Information:
Shawki reserves the right to make substitution of Materials & Equipment with equivalent Material / Equipment, if delivery so dictates or based upon the availability of items in the market.
1. Base Frame
• Steel I-beam 120mm depth for the main and secondary frame members.
• Steel frames are to be coated with epoxy primer gray and quick dry enamel ivory color as top coat at perimeter.
• Foundation is concrete 400mm x 400mm x 400mm
2. Floor System
• Wood floor joist 2” x 4” spaced @ 16” on centre at room areas while 40mm x 40mm x 1.2mm steel tubular at wet areas.
• Ordinary Plywood floor decking is 18mm thk at dry areas while shuttering plywood at wet areas.
• Vinyl linoleum floor covering for office facilities, carpet for prayer room,
• Wood baseboard painted finish for dry areas while vinyl baseboard at wet areas.
3. Walls
• KD wood 2” x 4” spaced at 24” on center (with steel tube &/or steel angle at corner for large sizes).
• Exterior panel is pre-painted GI corrugated sheet with 50mm thk fiberglass insulation with foil.
• Interior panel is 4mm thk décor plywood at internal or room partitions while 4mm thk polyester white plywood at wet areas.
• Low partition (1500mm from floor finish) for Construction Staff, QA/QC Staff, Safety Staff, and T.S.D. Staff
4. Roofing
• Trusses are composed of steel angle 40mm x 40mmx 3mm.
• Purlins are composed of steel tubular 40mm x 40mm x 1.20mm.
• Roofing material is pre-painted corrugated sheet complete with GI flashing (painted finish).
• Insulation of roofing is 50mm thk fiberglass insulation with foil.
5. Ceiling
• KD wood 2” x 2” as frames spaced at 24” on center both ways.
• Ceiling panel is 4mm thk polyester white plywood with wood cornice trims at corner while wood moldings at joints.
• Ceiling height is 2380mm from floor finish.
6. Doors
• Exterior door – 900mm x 2000mm made of steel complete with door lockset, door closer.
• Interior door – 850mm x 2000mm made of wood complete with lockset.
• Comfort room door – 700mm x 2000mm aluminum door
7. Windows
• Standard windows are made of aluminum sash powder coated, 2 panes with 6mm thk clear glass horizontal sliding provided with handle, manual lock and fly screen outside.
• Window size: 1100mmW x 700mmH
8. Millworks
• Cabinet at kitchen counter is Formica with aluminum framing.
• Stainless single sink with faucet at kitchen.
9. Electrical
The Portable Buildings provided with electrical system consisting of convenience outlet, receptacle, lighting, and power circuits, electrical tubing concealed within the panels, with approved boxes for switches and receptacles. PVC pipes conduits for all wiring (National Electric Code NEMA, MEW standard) as requested.
• Wiring to be non-metallic sheeted copper cable concealed in wall & ceiling.
• Electric panel board completed with Main Breaker and sufficient branch circuit breakers (ELETRA).
• PVC pipe conduits for all wirings.
• 110V and 220V, 60Hz, outlet, US type for circuit outlet.
• 220V, 60Hz for A/Cs.
• Device includes LAN and telephone.
10. Plumbing
• Plumbing installation is in accordance with Portable Building Practice, Uniform Plumbing Code, or Local Code.
• Piping concealed walling structure or surface mounted as required.
• Cold water supply piping PVC sch 80.
• Hot water supply piping CPVC sch 80.
• Washbasin (single type) Saudi Ceramic or equivalent.
• WC (western and eastern type) completes with reservoir mechanism system-porcelain (good quality) Saudi Ceramic or equivalent.
• Urinal with reservoir mechanism.
Inclusion to scope of works:
1. Fabrication and supply of buildings.
2. Delivery to location at Ras as Zwar, KSA only.
3. Erection of all portable units.
4. Concrete foundation of the buildings (joined).
5. Entrance steps (metal expanded sheet thread and riser).
6. Bottom skirting (same material as outside cladding 0.35mm pre-painted corrugated sheet.
7. Air con units and its accessories including the copper pipes, base for split unit AC. All AC are Zamil brand, hot and cold, Split Classic 2ton, 18000btu (6pcs), Window Classic (Rotary) 2ton, 18000btu (15pcs).
8. Water heater (Saudi ceramic).
Exclusion to scope of works:
1 Civil works including site preparation, clearing, grabbing, leveling, and compaction. Walkways, asphalting, concrete ramps, etc.
2 Connection for utilities (plumbing: sewer and water, electrical: grounding system, equipments, telecom: telephone, LAN, TV, CCTV, cables, cable trays and runways, etc)
3 Furniture, other equipments, built-in cabinets, panel mounted workstations, wooden shelves, etc.
4 Bar counter, counter top, work table (if any).
5 Window blinds, curtains, etc.
6 Shoe racks, bench seats, for prayer area, safety shoe lockers, etc.
7 Roof gutter, downspout, catch basins, and canopy.
8 Fire alarm and/ or fire fighting systems (fire extinguishers), speaker, and public address amplifier, smoke detector alarm (battery operated), exit signs (battery operated with English and Arabic wordings), emergency lights with backup battery.
9 Panic lever handle for door, etc to be supplied by owner. Only installation by us.
10 Automatic flushing mechanism for urinals to be supplied by owner. Only installation by us.
Terms and conditions: 75% down payment upon signing of contact and P.O.
Balance progress billing
Warranty for Buildings
One (1) year warranty against workmanship
بيع وتأجير الخيام
خيام قماشية
خيام المنيوم
كذلك برادو
برادو للوازم الإحتفالات والمناسبات تجد جميع متطلباتك من كماليات ديكور أثاث
(كراسي ..أميرية ، دبي الأحمر ، بلاستك ، تكايات ، جلسة عربية ..- سجاد .. ممشى ..- طاولات .. بوفيه ، دائرية ، خشب للشاي ، رخام للشاي ، ..- مكيفات - مراوح - مولد كهرباء - مسرح - كاسات ، دلات ، سخان ماء ، سخان طعام ، سماعات ومايك وسبيكر ، شوك وملاعق وسكاكين )
السعودية - المنطقة الشرقية - الدمام
تقبلوا تحياتي
سارة محمد من مركز خيام شوقي للتجارة والمقاولات
فاكس:8176804
0508531111: موبايل | |
|
